What should I try to bring PS2 Browser or any app like OPL to be HDD bootable? Is there something unique encryption apllyed to any PS2 app for it to become DESR's standard MBR.KELF? Or we can't made any FHDB like app on DESR at all?
There is a byte that determines the system type. For the PlayStation 2, it is 0x00, while it is 0x01 for the PSX. That was determined, by comparing a lot of PS2 KELFs against the PSX KELFs.
The alternative, is to have the same file header as the FFXI KELF, which is a whitelisted PS2 KELF that can be decrypted by the PSX.
Unfortunately, you cannot just edit any PS2 KELF to make it work because the header is signed. Meanwhile, we have FMCB for booting unsigned programs.
And one more - maybe I should try to remove it's 8mb ROM and swap it to a normal Memory Card IC?
The boot ROM is 4MB, as with the PlayStation 2. There is a 8MB NAND device installed alongside that one, which works like the memory card's NAND and is a supported boot device by the boot ROM.
It is unprotected and you can access its content via xfrom0, by loading XFLASH and XFROMMAN.
Maybe it might be a way to get PSBBN or any other app working as default OSD (without FMCB card inserted). Yes, we loose any DVR and XMB goods but that would be great as is.
You can, but the KELF must be one for the PSX.
Saving of games will still require a memory card, so you cannot really go without one.
What is Rainbow? I don't get it what the heck is that mode...
The CD/DVD drive for the PSX has two operating modes: Rainbow (sometimes mentioned as "Wri") and PS2 mode, as it is a 2-in-1 drive.
Upon power-on, the drive is in Rainbow mode. The XMB likely operates the drive in Rainbow mode too, as the writer OP-block is used to first detect the disc, before there is a switch to the PS2-side OP-block.
Switching of the CD/DVD drive mode is done with sceCdChgSys(), which is only available as part of the PSX's CDVDMAN modules.
The writer has a register interface that is not compatible with the PS2's normal DEV5 device. When in Rainbow mode, the drive status register lines up with a register that has 0x6 as its value. I don't know if it is a coincidence or a deliberate move for compatibility... but 0x6 means "not ready".
As for the PSX's EE kernel memory size, it is configured with syscall 0x85, which will update MachineType().
Upon invoking ExecPS2(), the TLB will be reconfigured based on that setting.
The remocon (includes the "Quit Game" button) is controlled with sceCdRcBypassCtl(), as with the SCPH-50000 series.